"On Guard" supply fire extinguishers which are manufactured in the UK to meet the requirements of BS EN3.
UK manufactured extinguishers still carry the well known colour code easily identifying the content,
unlike the Continental manufactured extinguishers which are completely red with the content being
identified in text only.
At "On Guard" we maintain a comprehensive stock of the most commonly used portable fire extinguishers
and can normally supply and install within 24 hours. Price quoted always include free delivery and
installation - for information contact
WATER
DRY POWDER
FOAM
CO2
FIRE BLANKETS
Available Models
9 ltr
1, 2, 4, 6, 9 and 12 kg
2, 6 and 9 ltr
2 and 5 kg
1 x 1m, 1.2 x 1.2m, 1.8 x 1.8m
"On Guard" maintains a fully equipped service centre where we can service, refill and repair all
makes of portable fire fighting equipment. We also provide on site annual service and inspection
at competitive prices for information contact
While "On Guard" will provide free surveys and quotations, we always advise clients that independent
and impartial advise can be obtained from the fire prevention branch of the City Fire Brigade
(telephone 72936).
We provide a comprehensive range of fire hoses from leading manufacturers such as Anglo, Britannia
and Tuffline; standard length and sizes are available ex-stock other requirements can be made to order.
For prices and information contact
Anglo Hoses are manufactured from the toughest, yet lightest and most flexible, man-made synthetic
yarns available. They are circular woven on the most modern looms into tough fire hose jackets,
every inch of which is subjected to rigorous inspection. A seamless tube of black synthetic rubber
is then steam vulcanised into the jacket to produce one of the most robust, light-weight, flexible
hoses available. Anglo fire delivery hoses are also available with a specially formulated red
polyurethane external coating, suitable for all climatic conditions, which gives increased resistance
to heat and excellent external protection against oils, most acids, alkalis and a wide range of chemicals.
Tested and accepted for marine use by the Department of
Transport Marine Directorate
Exceptional abrasion resistance
Completely rot-proof
Easily repaired in the event of accidental damage
Short length burst pressure 650 psi/45 kg/cm²
Maximum advised working pressure 300 psi/21 kg/cm²
Manufacturer's proof pressure 400 psi/28 kg/cm²
Britannia Hoses are manufactured from the toughest, yet lightest and most flexible, man-made synthetic
yarns available. They are circular woven on the most modern looms into tough fire hose jackets, every
inch of which is subjected to rigorous inspection. A seamless tube of black synthetic rubber is then
steam vulcanised into the jacket to produce one of the most robust, light-weight, flexible hoses available.
Britannia fire delivery hoses are also available with a specially formulated red polyurethane external
coating, suitable for all climatic conditions, which gives increased resistance to heat and excellent
external protection against oils, most acids, alkalis and a wide range of chemicals.
Manufactured and independently tested to BS 6391:1983
Type 3
Tested and accepted for marine use by the Department of
Transport Marine Directorate
Exceptional abrasion resistance
Completely rot-proof
Easily repaired in the event of accidental damage
Average short length burst pressure 750 psi/50 kg/cm²
Manufacturer's proof pressure 450 psi/30 kg/cm²
Maximum advised working pressure 300 psi/21 kg/cm²
The quality range of Tuffline hoses give superb resistance to abrasion and attack from many oils, greases, petrols and chemicals.
A fully synthetic textile layer is sandwiched between a synthetic rubber lining and cover to give added strength and durability. The adhesion between layers compares favourably with all other types of covered fire hoses.
Weight excluding couplings:-
1 1/2 "
1 3/4 "
2 "
2 1/2 "
2 3/4 "
3 "
lb / 100ft
20.8
22.5
28.1
33.3
39.1
45.6
Coil diameters excluding couplings:-
15 meters
23 meters
30 meters
50 feet
75 feet
100 feet
14 "
18 "
19 "
FITTINGS:
To complement our range of hoses we provide a full range of fittings - see details below.
Instantaneous cuplings to BSS 336.
Invariably the connection is 2 1/2"
instantaneous but the tail piece, over which the
fire hose is positioned, can be double ribbed
(recommended by Ardenoak) or serrated tail.
The standard tailpiece is 2 1/2" but other sizes
from 1" to 4" can be manufactured.
Ref 1 GM - 2 1/2" connection x 2 1/2" tailpiece
Ref 101 LA - 2 1/2" connection x 2 1/2" tailpiece
BSP threaded couplings are also widely used
and can be manufactured in a wide range of
threads and sizes.
To compliment our range of fire extinguishers, a range of extinguisher storage boxes
and fire point stands are normally available from stock.
SINGLE BOX
DOUBLE BOX
SINGLE STAND
DOUBLE STAND
Storage boxes are recommended where extinguishers are exposed to the elements or
to harsh working conditions found in commercial premises such as garages. They
are also useful in environments where vandalism and misuse is a problem such
as schools, hotels, residential complexes and shopping centres.
Stands provide an easily identifiable fire point for any commercial environment
where quick identification of fire points is required.
From the initial survey through design, supply, installation and commissioning, On Guard
supply all types of alarm systems from a simple single zone conventional system to an
analogue addressable alarm control system.
On Guard are the leading supplier of Kentec manufactured fire alarm control panels in
Gibraltar - our conventional range include the Sigma and K series control panels which
both meet the requirements of BS5839 as required by local ordinances.
Sigma Economy Fire Alarm 1-6 zones
K3000 Fire Alarm Panels from 2 zones
In order to meet the demand for analogue addressable control panels for larger installations
we have selected the Kentec Solo and Syncro control panels which provide an economic solution
to addressable installations meeting the requirements of BS5839.
At On Guard we provide a complete range of automatic extinguishing control system -
these systems can be used to control a number of extinguishing agents including CO2,
FM200 and Inert Gas. Other agents such as Dry Powder and AFFF Foam may also be
controlled using these systems.
K201 Single Area extinguishing control panel
K401 Multiple area extinguishing control panels
Status units
In addition to the supply and installation of fire detection and alarm systems, On Guard provide a
twenty-four hour emergency callout service & scheduled maintenance service. Our central alarm control
system can provide 24-hour monitoring of all makes of fire alarms.
In addition to Kentec Manufactured Alarms, On Guard are qualified service engineers for the
following manufacturers:
